Robot vacuum cleaners are a practical help in the home, but as with all technical devices, problems can arise. Whether it's a blocked brush, charging problem or sensor failure - such difficulties can affect the robot's performance.
In this article, we will show you how to identify the most common problems when using robotic vacuum cleaners and how to quickly solve them to get your robot working efficiently again. By performing simple maintenance actions, you can ensure that your device works for a long time and continues to do its job reliably.
The side brush does not spin - common causes and solutions
Why doesn't the side brush spin?
The side brush on a robot vacuum cleaner helps remove dirt from corners and along the edges. If it stops rotating, it may affect the cleaning efficiency.
- Blocked by objects: Hair, dust or other objects can block the brush and prevent it from rotating.
- Dirty brushes: Dried dirt and dust can limit the movement of the brush.
- Mechanical defects: In rare cases, a defect in the engine or timing belt can cause the problem.
Solutions to fix the problem
The following steps will help resolve the issue:
- Cleaning the brush: Remove hair, dust and dirt from the brush to allow free rotation.
- Check for blockages: Remove foreign objects blocking the mechanism.
- Mechanical Inspection: Check the timing belt and engine for damage.
Preventive tips for working brushes
- Regular cleaning: Clean the brush after each use or at least once a week.
- Inspect the brush mechanism: Check regularly for wear or damage.
- Use on suitable surfaces: Avoid surfaces that quickly collect hair and dirt.
The robot vacuum cleaner does not charge - what can you do?
Common causes of charging problems
- Deposits on the charging ports: Dust and dirt can prevent charging.
- Defective battery: An old or damaged battery may need to be replaced.
- Unstable docking connection: Uneven ground or misalignment can interfere with charging.
Solutions to get charging going again
- Clean the charging ports with a soft cloth.
- Check the battery – it may need to be replaced due to age or damage.
- Make sure the docking station is level and properly aligned.
Tips to avoid charging problems
Battery care: Avoid leaving the battery completely discharged for a long time. Charge regularly.
If you have one Narwal from us, you don't have to worry about battery maintenance because it automatically returns to the charging station when the battery is too low.
Avoid overheating: Do not store the robot in direct sunlight or in very hot environments.
The robot vacuum cleaner stops suddenly - causes and remedies
Common reasons for the robot to stop
- Obstacles in the way: Furniture, cables or carpets can block movement.
- Faulty sensors: Damaged or dirty sensors prevent accurate navigation.
- Software issues: Can cause the robot to freeze or shut down.
This is how you solve the problem
- Check for obstacles and give the robot free space to move.
- Clean sensors with a soft cloth.
- Restart the robot to fix any software errors.
Preventive measures for smooth operation
- Clean sensors regularly from dust and dirt.
- Place the robot in an open area without obstacles.
- Keep the software updated to get the latest improvements.
Carefree cleaning with your robot vacuum cleaner
From time to time, robot vacuum cleaners may experience minor problems, but with a little maintenance and attention, they can usually be quickly resolved. We hope the solutions presented will help you get your robot back in top shape.
Remember that regular maintenance and cleaning not only extends the life of your appliance but also improves cleaning efficiency. In this way, your home will always stay clean and the robot vacuum cleaner can continue its work without interruption. Enjoy using it and have a worry-free cleaning!